Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Stems

Bontrager has never cut corners when it comes to something as important to safety as a stem. But having a safe stem shouldn't mean limited sizing options, that's why Bontrager stems come in a wide variety of lengths and rises. No matter what your style of riding, Bontrager has a stem with the fit, performance, and style you're looking for.

Whisky Parts Co. No. 7 Stem
$40.00 - $45.00
Whisky's No.7 Stem is a lightweight stem with a clean aesthetic. Stems only have a few jobs to do: hold the bars, provide stable support, and look good. Ours does all three admirably. Paired with any of our handlebars, it rounds out the perfect Whisky cockpit. Available in a wide range of lengths to perfect your bike's fit and performance.
Bontrager Rhythm Comp Knock Block Stem-No Packaging
$49.99
Run your favorite 31.8mm clamping diameter handlebar on a bike with Knock Block with the Rhythm Comp 31.8. It adds Knock Block compatibility to a durable stem with multiple lengths to let you fine-tune the fit to your ride. Get 31.8mm handlebar compatibility with your Knock Block system;Also compatible with standard headsets and spacers;Knock Block system protects frame from impacts by fork and handlebars by eliminating over-rotation of bars;Available in a wide range of sizes for today's mountain rider;See Service Parts for other Knock Block parts;
Syntace Megaforce 2
$135.00
Syntace's Megafroce 2 stem is intended for all-mountain and downhill riding and comes in a range of sizes with a focus on torsional stiffness and weight savings. The 42mm wide bar clamp area stiffens up cockpits with bars wider than 700mm Titanium bolts help keep the weight low and strength high. - Stack height: 36mm - Weight: 132g (70mm)
Bontrager Elite Stem
$64.99
The perfect fit The Bontrager Elite Blendr Stem provides easy solutions for accessory integration. This alloy stem is light and strong, and it gives you endless options to integrate lights, a computer and more with Blendr accessory integration. Product details - Blendr Elite allows seamless accessory integration - 4-bolt dual band clamp retains stiffness and reduces weight - Opposing 2-bolt steerer tube clamp - Uses M5 countersunk, corrosion-resistant steel bolts with 5.2Nm torque spec - Approved for carbon bars and steerer tubes - Suitable for both MTB or road use - Includes Blendr mono base and accessory mounts
Bontrager RXL 7 Degree Factory Overstock Stem
$40.00 $89.99 56% Off
A traditional, lightweight, alloy stem with increased compliance for road and MTB use. Light as carbon. Strong as hell. The super compliant 7050-T6 aluminum alloy Race X Lite bike stem is light enough for the road but strong enough for the mountain. It features a flip-flop 7 degree rise and 31.8 clamp that help it excel in lightweight versatility for a variety of hand positions. - 7050-T6, 3D, forged alloy construction - 4-bolt face plate helps distribute clamping load on ultra-lightweight handlebars - Angled steerer tube clamp spreads clamping pressure on steerer and is carbon friendly - Countersunk, corrosion-resistant steel bolts do not require washers - Dual clamp bolts are strategically positioned to evenly distributing clamping forces - This stem requires at least 5mm of spacers above and below the steerer tube clamp area - Go green and save green – Zero packaging means zero waste and zero extra cost
Bontrager XXX Blendr Stem
$275.00
OCLV Carbon construction of the XXX Blendr stem combines lightweight strength with a classy aesthetic. Captured titanium hardware ensures you never drop bolts again, and the dual-banded faceplate shaves weight and blends perfectly into mounted accessories with the Blendr integration system. - Ultra-light OCLV Carbon construction - Flush-fit 4-bolt dual band bar clamps offer seamless look - Captured Titanium screws save weight while making installation easy - Integrate accessories with included Blendr Mono Base and Blendr Ion and Garmin mounts - Mounts available for use with Ion and Trip, Garmin, GoPro, and SRM accessories - Approved for carbon bars and steerer tubes
Bontrager Elite Blendr Stem
$64.99
Stiff and light with the cleanest accessory solutions available When all you need is the right position, the Elite stem gets it done and more. The strong and light alloy stem is your bike's best workhorse and also features Blendr accessory integration for a sleek setup. Key features - Seamless accessory integration with Blendr Elite - 6061-T6, 3D, forged alloy construction - 4-bolt dual band clamp retains stiffness and reduces weight - Opposing 2-bolt steerer tube clamp - Uses M5 countersunk, corrosion-resistant steel bolts with 5.2Nm torque spec - Safe for use on carbon steerer tubes and handlebars - Includes one Blendr base to integrate Ion lights and Trip computers.
Bontrager XXX Integrated Road Handlebar/Stem
$599.99
The Bontrager XXX Integrated Handlebar/Stem is a one-piece carbon bar/stem combo that brings clean looks and light weight to any road bike. Lightweight 100% OCLV Carbon construction offers a great road feel and control, while calibration marks and a flat front surface ensure easy lever installation. Features Di2 compatible ports for clean internal wire routing when integrated with Shimano EW-RS910 bar-mounted Di2 junction. Product details - Seamless accessory integration with Blendr - Flat surface front of bar for clean cable routing - Calibration marks allow precise, accurate and repeatable brake lever position - Variable radius, compact flare (VR-CF) shape offers wrist clearance in the drops - 100% OCLV Carbon construction - Internal relief channel eliminates need for additional spacer above stem - Safe for use with carbon and alloy steerer tubes - Compatible with Shimano EW-RS910 bar end Junction-A for cleaner Di2 routing
Dimension 25.4mm Threadless Stem
$32.00
Dimension 25.4 Stem is a fully forged 6061-T6 aluminum stem with 4-bolt handlebar clamp. - 2-D forged AL-6061-T6 - Four-bolt handlebar clamp - 41mm height - Dimension stems are not intended for use with carbon handlebars or carbon steerer tubes - Weight: 130g-180g
Promax Banger Stem
$69.99
Promax Banger stems have a front-load design and can be used with either side up, providing a 5-millimeter drop or rise. Available with 48-millimeter and 53-millimeter extensions, they are cold forged from the highest quality 6061-T6 aluminum then CNC machined to enhance the shape and further reduce weight. - Stack height: 30.5mm
Promax DA-1 Stem
$50.00
Promax's DA-1 XC mountain bike stem is 3D cold-forged, then CNC-machined from 6061-T6 aluminum to create a lightweight and strong stem. The two-piece faceplate features their bar-gripping DWT (Dynalock Web Technology), which increases the bar/stem interface.
Spank Spike Director 2 Stem
$49.90
- Proven alloy strength and security for racing or freeriding - 2D forged alloy body and wide, chamfered bar-clamps offer unparalleled support to handlebars, enhancing safety and longevity in your DH cockpit - Shot peened and anodized for high strength and low weight - CNC weight optimized for 31.8 bars - Key Technologies: MGR, chamfered bar clamp - Material: 2D Forged MGR Alloy, CNC Weight Optimized - Length: (mm) 50 - Rise: (°) 15 - Diameter (mm): 31.8 - Stack Height (mm): N/A - Weight (g): ±150 - Finish: Shotpeen anodized, laser logos
Salsa Guide Trail 35.0 Stem
$40.00 - $45.00
The Guide Trail Stem translates your handlebar input into precise trail movements. It’s an ideal choice for modern trail bikes that have a long front center and wide bars. The Guide Trail Stem is lightweight, durable, and available in a variety of sizes to suit rider preferences. - AL-6061-T6 aluminum construction - 3D-forged for increased strength, then CNC-machined - 4-bolt faceplate design - 35.0mm bar clamp - 28.6mm stem clamp - 40mm stack height - Bead-blasted, then anodized, finish
Dimension 31.8mm Threadless Stem
$32.00
Dimension 31.8 Stems are fully forged 6061-T6 aluminum stems that have a 4-bolt handlebar clamp. - 31.8mm can be used with 26.0 bars with additional shim (SM5317) - Dimension stems are not intended for use with carbon handlebars or carbon steer tubes - Weight: 130g-180g
Dimension Trail Stem 31.8
$30.00
For cross country and all-mountain riding, Dimension Trail Stems provide a broad array of sizing options, rigorously tested to ISO 4210 Mountain standards. - Constructed with AL-6061-T6 aluminum - Shot-peened finish - Dimension stems are not intended for use with carbon handlebars or carbon steerer tubes
Dimension Trail Stem 35.0
$35.00
For cross country and all-mountain riding, Dimension Trail Stems provide a broad array of sizing options, rigorously tested to ISO 4210 Mountain standards. - Constructed with AL-6061-T6 aluminum - Shot-peened finish - Dimension stems are not intended for use with carbon handlebars or carbon steerer tubes
Ritchey SuperLogic C-260 Carbon Stem
$269.95
When stiffness and weight are the top on your list, you want Ritchey's SuperLogic C-260 Carbon Stem. This revolutionary design starts with a bar clamp that wraps a full 260-degrees around the handlebar to distribute clamping stress evenly through the handlebar, faceplate, hardware and stem body. Ritchey's first full-carbon stem, the C-260 features high-modulus carbon for stellar strength-to-weight ratio that translates into a solid but forgiving ride. And, the steer tube clamp uses three bolts and a curved slot to reduce clamp stress on the steer tube, so you can run carbon bars and a carbon steerer with no problem.
Ritchey WCS C220 84D Stem
$89.95
You really can have it all-the WCS C220 stem rivals the performance of the revolutionary C260 stem design, but it's quicker and easier to install and remove thanks to a press-fit handlebar clamp interface and forward-facing hardware. The WCS C22 84D Stem offers 6-degrees of positive or negative rise. First proven on the Ritchey Trail Stem, the C220 handlebar clamp design creates a more secure interface by wrapping a full 220 degrees over the handlebar. Bolt forces are aligned with the clamp so that the stem body 'embraces' the handlebar, which is less prone to damaging lightweight bars. This clamp design allows for a lighter faceplate and stem body with no sacrifice in strength or stiffness. The stem body is forged 2014 aluminum for further weight reduction. Premium quality CrMo steel bolts are used throughout. - Material: 3D forged 2014 alloy body - 4 x 4mm coated CrMo steel forward-facing faceplate bolts - 2 x 4mm coated CrMo steel offset steer tube clamp bolts - 5Nm torque max on all hardware - Compatible with all 31.8mm bars - Press-fit clamp design installs and removes like a standard stem - Angle: 84/6 degree - Steerer Height: 42mm - Faceplate Width: 42mm - Blatte finish - 121g (110mm)
Bontrager Madone XXX Integrated Bar/Stem KVF Aero
$599.99
The Madone is built as a seamlessly integrated machine designed to do one thing: go fast. Trek's Madone Integrated Bar/Stem is an important part of that integration. Available in a variety or widths and reaches so you can dial in your superbike specifically for you. - Compatible with model year 2016/17 Madone - Variable radius, compact flare (VR-CF) shape offers wrist clearance in the drops - 100% OCLV carbon fiber construction - Seamless accessory integration with Blendr - Blendr accessory bases and mounts sold separately
Hope Freeride Stem
$133.60
The Hope AM/Freeride Stem is light, stiff, and provides pin-point steering. It's proudly CNC'd in the UK from solid billet 2014-T6 and features opposing steerer and moto-style handlebar clamp for exceptionally rigid steering characteristics. - 10.9 DIN chromoly bolts - Weight: 135g
Promax Impact Stem
$50.00
The Impact is Promax's top-load BMX stem. They come in 48-, 53-, and 60-millimeter extensions and are cold-forged from the highest quality 6061-T6 aluminum then CNC-machined to refine the shape and further reduce weight. The “open” design keeps weight low while maintaining plenty of strength and ensuring your bars stay put. - Weight: 9.8oz. - Stack height: 30.5mm
3T Apto Team
$100.00
For 56 years, 3T products have offered a combination of Italian elegance and performance. The Apto once again combines both with a beautiful shape and a lightweight, stiff and strong structure. The reversed bolts clean up the faceplate, while their wide spacing increases the connection to the handlebars. Its double steerer bolts (Titanium in case of the TEAM version) securely hold the stem in place.
Ritchey Trail Stem
$39.95
- C-220 degree extra-wide bar clamp improves stiffness and fits most riser bars - 3D forged 6061 alloy - 42mm steerer height with 41mm faceplate width - 142g (90mm)
Promax Impact Mini Stem
$50.00
There's no reason a bantam-sized rig shouldn't have the advantages a top-notch stem provides. Promax's Impact Mini Stem fits the bill with rock-solid bar clamping, stunning good looks, and the stiffness to nab the holeshot and keep it on-line through the berms. Set that mini up right! - Cold-forged and CNC-machined from 6061-T6 aluminum alloy - Top-load clamp design - Fits 1-inch steerer tubes
Ritchey WCS Carbon Solostreem Handlebar/Stem
$499.95
A new breed of champion is born. The WCS Carbon Solostreem features a classic bend, UCI-compliant aero top section with short/shallow classic drop, integrated mount ready for K-Edge or similar devices, and underside grooved cable routing for a sleek appearance. It enjoys a matte UD carbon finish and its curved stem clamp greatly reduces steerer stress. - Material: Carbon monocoque with forged alloy steerer clamp - Stem Angle: 84 -degree - Drop/Reach: 126/75mm(Measured center-to-center where the levers mount) - Sweep/Flare: 4.7/1-degree - Features mounting holes for computer/accessory mount - Matte UD carbon finish - Weight: 350g (42cm x 100mm)
Ritchey Classic C-220 Stem
$69.95
You really can have it all; Ritchey's WCS C-220 stem features revolutionary stiffness and classically inspired good looks, but it’s quick and easy to install and remove thanks to a press-fit handlebar clamp interface and forward-facing hardware. The C-220 handlebar clamp design creates a more secure interface by wrapping a full 220 degrees over the handlebar. Bolt forces are aligned with the clamp so that the stem body ‘embraces’ the handlebar, which is less prone to damaging lightweight bars. This clamp design allows for a lighter faceplate and stem body with no sacrifice in strength or stiffness. The stem body is forged 2014 aluminum for further weight reduction. Premium quality chromoly steel bolts are used throughout. - Material: 3d forged 2014 alloy body - 4 x 4mm coated CrMo steel forward-facing faceplate bolts - 2 x 4mm coated CrMo steel offset steer tube clamp bolts - 5Nm torque max on all hardware - Compatible with all 31.8 bars - Press-fit clamp design installs and removes like a standard stem - Angle: 84/6 degree - Steerer Height: 42mm - Steerer diameter: 1-1/8" - Faceplate Width: 42mm - Silver Finish - 121g (110mm)
Parlee Cycles Stem
$300.00
Parlee’s carbon stem is a masterpiece of strength, beauty and performance. It utilizes a 35mm bar clamp diameter that offers sharp steering precision while the two-part face plate is forged for longevity. Titanium bolts are mated to replaceable aluminum inserts throughout, protecting your investment from cross threading and other mechanical damage. - Weight: 125g
Ritchey WCS Trail 35 Stem
$94.95
More than just a beefed-up version of Ritchey's other stems, the WCS Trail 35 stem features their patented C220 clamp fits a wide variety of riser bar bends and still packs a dramatic increase in stiffness and strength over competitors' designs. The 35mm clamp diameter takes advantage of the increased stiffness and power of larger diameter handlebars. - 3D Forged 2014 alloy for superior strength and lightweight - 220 degree, extra-wide bar clamp improves stiffness and fits most riser bars - Oversize 35mm bar clamp for use with 35mm OD handlebars - Material: 3D Forged 2014 alloy - Rise: 0° - Stack Height: 45mm - Faceplate Width: 40mm - 130g (70mm)
3T Apto Team Stealth
$110.00
For 56 years, 3T products have offered a combination of Italian elegance and performance. The Apto once again combines both with a beautiful shape and a lightweight, stiff and strong structure. The reversed bolts clean up the faceplate, while their wide spacing increases the connection to the handlebars. Its double steerer bolts (Titanium in case of the TEAM version) securely hold the stem in place.
TruVativ Descendant 35mm Stem
$65.00
Mix and Match might work for clothing, but not your mountain bike cockpit. The new Descendant stem is 3D forged from 7075 alloy, then machined for weight reduction, and is the perfect match for your Descendant bars. Built strong, to take on the world’s toughest trails, Descendant stems keep you pointed in the right direction. - Perfect match with Descendant handlebars - 3D forged 7075 - CNC machined for weight reduction - Four bolt handlebar clamp - Two bolt steerer clamp
Page 1 of 4 Next page