WeThePeople's Utopia Top Cap is made of 7075 alloy and has a 3/8-inch square drive socket head, allowing you to dial in your headset preload with a standard 3/8-inch ratchet or breaker bar. It's available in always-stylish black.
- Stabilizes bike with double-leg stance - Fits most 26" and 700c bikes - Made of lightweight aluminum - Mounting plate included to fit a variety of bikes
$8.00 - $17.00
Shimano Deore XT M8000-GS Rear Derailleur Cage Plate
Shimano Front Derailleur Cable Fixing Assembly
$13.00 - $13.75
Shimano STI lever hoods. - Fits Ultegra ST-6700 levers only
The Gyro G3 upper top plate is designed for use with the G3 detangler.
In conjunction with the EPS Power Unit, the Interface is the "thinking" center of EPS and is responsible for on board diagnostics, managing settings, converting analog signal from Ergo Levers to digital and sending it on to the Power Unit maintaining a dialogue with the Power Unit. - Weathertight, o-ring sealed connectors - Waterproof to 1m for 30 minutes (IP67 Rated) - Compatible only with the Chorus Power Unit
SRAM BB30/English Bottom Bracket Adaptor allows conventional threaded bottom brackets to be installed in a BB30 frame; 68mm shells only - Install with headset press and green Loctite
This replacement bolt unit ensures your I-Spec II shifters, dropper levers, and/or brake levers are securely fastened. Make sure your controls are ready to rip.
Keep the cable fixed securely in your XTR M9000 rear derailleur with this Shimano Rear Derailleur Cable Anchor Assembly
Get that nice derailleur shifting smoothly and operating silently again with a Shimano Rear Derailleur Pulley Set. - OEM pulley set for XTR RD-M9000 - Sealed bearing guide & tension pulley - Guide pulley with extra long teeth for increased chain control
$34.14 - $42.62
Zipp Speed Weaponry Vuka / Stealth Riser Kit - Bolt kits sold separately
Designed for use with the Zipp SL Speed Seatpost; an internal mount to hold a Shimano DI2 seatpost battery. - Mount compatible only with B1 SL Speed seatpost - Weight: 18g for 27.2mm, 19g for 31.6mm
The OPT remote allows instant engagement of Cane Creek's Climb Switch on Double Barrel rear shocks, giving the rider precise control of traction and climbing feel. - Hard anodized for durability - Requires brake cable and housing for installation - Bottom mount for below bar engagement or top mount for above bar - Compatible with DBinline, DBAir IL, and DBCoil IL shocks only
Mylar-laced woven elastic guard stretches around your fork to block mud/water as you ride.
Replacement pads for the F-40 armrest. - F-40 Standard replacement pads are 16mm thick, built with moderate thickness to provide comfort in both training and race conditions - Made of EVA foam with anti-bacterial/anti-microbial Lycra cover
The F40 Armrest was designed in combination with the Aeria Ultimate to offer a massive adjustment range in a simple solution. Creative engineering and design have yielded a strategic offset bolt pattern offering a 67.5mm fore/aft adjustment range at 7.5mm steps between each position and a 92.5mm width adjustment range at 18.5mm steps between each position. Upgrading any of Profile's T+ Carbon Aerobar Systems to the F40 armrest will increase the range of adjustability by 31%, offering 42 unique armrest positions. - Armrest Material: 6061-T6 AL - Armpad Material: EVA Closed Cell Foam - Compatibility: J2/J3/J4/J5/L1/L2/Aeria/Aeria Ultimate - Size: 122mm x 84mm - Stack: 19mm (w/Standard Pad) - Reach Adjustment: 7.5mm Increments - Width Adjustment: 18.5mm - Rotation Adjustment: +/- 7.5 - Weight: 175g
Fits Profile Design's F-18 through F-22 Series armrests, providing a low profile mount for arm pads. - Construction: 6061-T6 Forged Aluminum - Availability: Two kits to choose from: 31.8mm for flip-up styles or available in 31.8 for non flip-up style. - Weight: 65-70g - Does not include bottom clamp
Weight-savings is no excuse to have an ill-fitting cockpit. Shave every possible gram with these Carbon Headset Spacers from FSA, and ensure your bike fit is right on the money.
$3.50 - $20.00
Available in the most common sizes and thicknesses-in small or bulk quantities, Problem Solvers headset spacers help riders get their stack height just right. - Made from Aluminum, anodized or polished finish, without logos - 1-1/8" Diameter - S.H.I.S. Stem Clamp Diameter: 28.6mm
Dimension Seatpost Clamps - Diameters: 28.6mm, 30.0mm, 31.8mm, 35.0mm - Weight: 34g
RockShox Reverb Internals
Remote rebuild kit for A1 generation Reverb and Reverb Stealth Posts. - Plunger, Button, Boot, and O-Rings - For "A1" designated posts, 2010-2012 - A1 posts have a silver return speed adjuster on the remote and no laser-etched logos on stanchion by the saddle cradle
SRAM Caliper Brake Adjusting Barrel with Nut and Cable Fixing Assembly.
Spacers for Easton bottom brackets.
$19.95 - $89.95
Replacement frame parts and hinge clamps for Ritchey Break-Away frames. - 45.0mm Hinge clamp compatible with boom tube of Break-Away Tandem
Fork crown race for genuine Ritchey headsets. - For cartridge type headsets with a 45° taper - Alloy - ZS44/30
Replacement dropout kit for Ritchey Timberwolf frames - Includes both drive and non-drive side dropouts
Replacement faceplates for Ritchey WCS C220 stems.
Replacement bolts for Super Logic stems. Original equipment stem hardware ensures exact fit and finish. - Replacement M5 bolts for 4-Axis stems - Includes M5*P0.8*16L x 4pcs & M5*P0.8*18L x 2pcs - Bit Size: 4mm - Thread Pitch: M5 - Length: 4x 16mm, 2x 18mm