Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Other

$27.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M4x8 Flat Head Screws

$9.99 - $11.99
Switching frames doesn’t mean you have to switch posts! Use your old posts without worry with Problem Solver's wide variety of seatpost shims.
-100mm long
-3mm lip
-Alloy
Problem Solvers Seatpost Shims are not intended for use with carbon seatposts

$9.99 - $16.50
Problem Solvers has a couple different options for adding cable housing or brake hose guides to your bike. Choose from the adhesive stick-on option or the guide that mounts to existing housing stops.

$121.00
All CeramicSpeed Bearings are hand-built in Denmark. Super-smooth CeramicSpeed grade 3 Silicone Nitride balls are matched (within microns) with hardened steel raceways that feature an ultra-smooth polished groove.
The balls are held in place by a reinforced polyamide cage. Every bearing is optimized with a low-viscosity CeramicSpeed All Round Grease to minimize friction and increase bearing life. Non-contact seals complete the bearings, keeping dirt and moisture out. CeramicSpeed Bearings can be used for any cycling discipline: Road, TT, Tri, Track, Cross, and MTB. The benefits are super low friction, better power transfer, and increased bearing life.
During the building process, we check each bearing four times by hand to ensure that all parts are matched perfectly. CeramicSpeed Balls are 400% smoother, 128% harder, and 58% lighter than standard steel bearings normally used in the bicycle industry. When comparing the CeramicSpeed Balls with other ceramic balls in the industry, you will find that the CeramicSpeed Balls are 15% harder, take 99% higher loads, and are 100% smoother.
- Inner Diameter: 17mm
- Outer Diameter: 26mm
- Width: 5mm

$16.99
- Install this in line to your shift housing for precise tension adjustments
- Compatible with all 4mm shift housing
- Allows for 3.5mm of adjustability
- Indexed movement prevents any accidental or unintentional adjustments
- Compact design only adds 14mm to housing length

$20.15
The Problem Solvers Clamp-On Cable Guides are for clamping on the rear brake cable housing on your frame when the frame doesn't have provisions for holding a full-length brake cable housing. You get 3 stainless-steel clamps and the nuts and bolts for them.

$25.00
Pretty up your ride and secure your seatpost with the All-City Shot Collar seat clamp.
- Laser-etched All-City logo
- Aluminum body with stainless steel hardware

$41.99
- Clamps to a threadless steerer
- Offers up to 4-1/2" stem height increase
- Forged 6061-aluminum provides extra strength
- Machined aluminum top cap is threaded, providing easy installation

$9.48
- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity
- No retainer means these bearings have 40 percent more capacity

$29.99
Problem Solvers' Cassette Cog Carrier (CCC) bolts on to a splineless single-speed cog to give you a wide, Shimano-splined cog to run on your freehub body. The wide profile won't damage your freehub body.
Tech Details:
Aluminum carrier with steel cogs

$130.00
A higher quality spring greatly improves the performance of your coil shock. VALT springs from Cane Creek are much lighter than traditional steel springs while pushing the boundaries of performance and durability.
- Inner diameter of 36.5mm is compatible with all Cane Creek coil shocks
- Also compatible with Manitou, Marzocchi, XFusion, ELKA/MRP, BOS and DSP
- Compatible with Fox coil shocks with required spring clip adaptor

$39.90
- Fits 2000 and newer Campagnolo wheels
- Fits all Fulcrum wheels
- Fits 1999 Record/Chorus hubs and all Campy hubs 2000-newer
- 27.0mm thread OD
10-speed:
- For use with Campagnolo cassettes with 12 to 16 tooth first position cogs
- Lockring has a 38.5mm flange diameter
11-speed:
- For use only with Campagnolo 11 speed cassettes with 12 tooth first position cogs

$32.00
Replacement derailleur hanger for Specialized Diverge, CruX and Roubaix Carbon with Specialized SCS 135x12 thru-axle system. All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - (1) M5x10 Socket head screw included

$33.99
All-round protection. The Chainbow chain protector is made of impact-resistant black plastic and aluminum, and offer perfect protection from the chain. Thanks to the telescoping function and the variable positioning of the angle bracket, this chain protector is adaptable to many frame geometries and component combinations.

$32.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (3) M3x8 Flat Head Screws - Specialized Part #9890-4226 Note: This hanger has been updated to match Specialized Part #9890-4226 and will accommodate 28-tooth and larger cassette cogs. Shifting with smaller cassette cog ranges will not be adversely affected.

$32.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M5x10 Socket Head Screw

$32.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M4x10 Flat Head Screws

$32.00
All Wheels Manufacturing replacement derailleur hangers are produced in our Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M5x10 Socket Head Screw - For Thru Axle - Replaces Haibike Part #2501170090

$32.00
All Wheels Mfg. replacement derailleur hangers are produced in Colorado to exacting tolerances. - Replaces Scott Part #235286 - Attaches to frame with (2) special M5x10 screws (sold separately) - CNC machined 6061 aluminum - Black anodized finish

$40.00
All Wheels Mfg. replacement derailleur hangers are produced in Colorado to exacting tolerances. - Replaces Scott part #254090-222 - For standard mount derailleurs - Attaches to frame with (1) special M4 socket head screw (sold separately) - CNC machined 6061 aluminum - Black anodized finish

$32.00
All Wheels Manufacturing replacement derailleur hangers are produced in our Colorado shop to exacting tolerances.
- CNC machined 6061 aluminum
- Black anodized finish
- Attaches to frame with (2) M3x10 Flat head screws
- Fasteners Included
- Replaces: Giant Part # 370000012
Note: This hanger is not the same as our DROPOUT-167. There is no ridge that fits into the axle pocket.
Compatible with the following Giant models:
- Escape R 3 - 2018+
- Escape R Disc - 2020
- Escape RX 1 - 2018+
- Escape RX 2 - 2018+
- Escape RX 3 - 2018+

$22.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt (Long - Bolt Only)

$27.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M4x8 Flat Head Screws Notes: - PLEASE NOTE! M4 HOLES ON HANGER ARE NOT THREADED! - FRAMES USING THIS HANGER HAVE THREADS IN DROPOUT!

$35.00
Hope Quick Release Seatpost Clamps.
· CNC-machined aluminum lever and clamp
· Brass cam allows increased durability clamping force
· Laser-etched logos

$7.49
Notched binder bolts for frames with integrated seat collars.
Details:
CroMoly steel bolts
Three lengths available: 16, 19 and 21mm
8mm diameter

$30.99 - $61.99
Sport brake housing packs high performance features into a colorful and durable package, making it a functional and aesthetic upgrade.
- Slick-Lube lined housing reduces friction for faster cable movement and better braking response
- High carbon internal steel coil for improved stiffness
- Appropriate for Teflon coated cables as well as steel and galvanized
- Length: 10m

$24.99
Riser kits increase stack height to fit a wide range of riding styles for efficient positioning; compatible with ZBS Aerobars, T Plus Carbon Series Aerobars, T Plus Aluminum Series Aerobars, Supersonic Aerobars, Sonic Aerobars, and Subsonic Aerobars.
- Multiple kits can be used to reach desired height up to 80mm rise
- Raises armrest and extensions together to maintain a comfortable wrist position
- Kit includes a pair of risers, bolts specific to riser size, and mounting hardware
- Risers are compatible with J2, J3, and J4 Aerobar brackets
- Clamp diameter: 31.8mm