Filter By:

  • Show More Brands
  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Chainrings

Wolf Tooth Components 5-Spoke GXP Direct Mount Ring
$78.00
Wolf Tooth's SDM® chainrings replace your existing spider and chainring with one clean looking, light weight, and stiff piece of machined billet. These come in 3 different offsets: standard GXP, Boost and BB30. Compatibility: - These direct mount chainrings will replace your existing chainring and spider, which is attached via 3 bolts on the back side of the spider near the spindle. You will use these same 3 bolts to attach the Wolf Tooth SDM® chainring. - There are 3 offsets: Standard: 47mm chainline, 6mm offset for cyclocross and road cranks Standard: 49mm chainline, 6mm offset for GXP and long spindle BB30 Boost: 52mm chainline, 3mm offset BB30: 49mm chainline, 0mm offset for BB30 short spindle cranks - Fat Bikes: If you are planning to use this on an X9 or XX1 fat bike crankset with a 190/197 rear hub spacing use the 0 offset ring. If your fat bike has a 170/177 rear hub spacing, use the Standard 6mm offset
Shimano Deore XT M8000 11-Speed Outer Chainring
$62.00 - $105.00
Shimano XT M8000 11-Speed Chainrings - Chainring BCD: 96 Shimano Asymmetric - Color: Black - Drivetrain Speeds: 11 - Material: Aluminum - Ring Position/Type: Inner - Tooth Count: 34
Wolf Tooth Components Direct Mount Chainrings for SRAM Cranks
$78.00
Wolf Tooth's SDM chainrings replace your existing spider and chainring with one clean looking, light weight, and stiff piece of machined billet. These come in 3 different offsets: standard GXP, Boost and BB30. Compatibility: - These direct mount chainrings will replace your existing chainring and spider, which is attached via 3 bolts on the back side of the spider near the spindle. You will use these same 3 bolts to attach the Wolf Tooth SDM® chainring. There are 3 offsets: - Standard: 47mm chainline, 6mm offset for cyclocross and road cranks - Standard: 49mm chainline, 6mm offset for GXP and long spindle BB30 - Boost: 52mm chainline, 3mm offset - BB30: 49mm chainline, 0mm offset for BB30 short spindle cranks - Fat Bikes: If you are planning to use this on an X9 or XX1 fat bike crankset with a 190/197 rear hub spacing use the 0 offset ring. If your fat bike has a 170/177 rear hub spacing, use the Standard 6mm offset - If you have a BB30 crankset (30mm diameter Aluminum Spindle) this measurement will determine whether it is a long or short spindle:
Race Face Narrow-Wide Single Ring
$59.99
Race Face Narrow-Wide Single Chainrings for 9-11 speed drivetrains. • 7075-T6 aluminum, aerospace grade strength. • Compatible with 9, 10, and 11 speed • Narrow Wide tooth profiling ensures ultimate chain retention • Stiff 4mm plate thickness and I-beam construction transfer loads without flexing • Reversible laser etched graphics • 36t = 50g • 30t Narrow-Wide single rings are threaded with a standard M8 x 0.75 chainring bolt thread
Wolf Tooth Components Shimano M9000/M9020 Chainring
$74.95
- Fits asymmetrical 96mm BCD with built-in threaded standoffs - Used on Shimano XTR M9000 and M9020 crankset (both race and trail models) - Features Drop-Stop tooth design to prevent unwanted chain drop - Mount using the stock Shimano XTR M7 chainring bolts - 49mm chainline for 28-34 tooth and 50mm for 36 tooth - Recommended for use with 10 or 11sp chain (10sp chain works on 9sp drivetrain) - Made in the USA from 7075-T6 aluminum alloy - 41g (30t)
Shimano Dura-Ace 9000 Outer Chainring
$289.99 - $383.52
Shimano Dura-Ace 9000 11-Speed Chainrings. - Chainring BCD: 110 Shimano Asymmetric - Color: Silver/Black - Defined Color: Silver - Drivetrain Speeds: 11 - Material: Aluminum - Ring Position/Type: Outer
Shimano Dura-Ace R9100 Inner Chainrings
$39.99 - $55.00
The Shimano R9100 series crankset achieves the ultimate in optimal power transfer. It does this through a reinforced chainring on its unique asymmetrical four-arm spider construction. - Chainring BCD: 110 Shimano Asymmetric - Drivetrain Speeds: 11 - Material: Aluminum - Ring Position/Type: Inner
Shimano XTR M9000 Inner Chainring
$26.00 - $27.00
Shimano XTR M9000 11-Speed Chainrings - Chainring BCD: 64 Shimano Asymmetric - Drivetrain Speeds: 11 - Material: Aluminum - Ring Position/Type: Inner
Shimano XTR M9000 Outer Chainring
$213.00 - $225.00
Shimano XTR M9000 11-Speed Chainrings - Chainring BCD: 96 Shimano Asymmetric - Drivetrain Speeds: 11 - Material: Aluminum - Ring Position/Type: Outer
Shimano 105 5800 Chainring
$17.00 - $95.00
- Drivetrain Speeds: 11 - Chainring BCD: 110 Shimano Asymmetric - Material: Aluminum
Shimano SLX M7000 Outer Chainring
$36.00
That big ring always seems to wear out first, and is the first to take damage when you're blasting over obstacles. Shimano's SLX M7000 11-Speed Chainrings for double cranksets get you back on the trail in no time. - 34T for use with 24T inner ring - 36T for use with 36T inner ring - 38T for use with 28T inner ring
SRAM Road Inner Chainring
$24.99
SRAM's road chainrings are stamped from 7075 aluminum for low weight and excellent strength. The teeth are ramped for precision shifting, too.
SRAM Yaw Compatible Inner Chainring -130 BCD
$24.99 - $38.99
Replace worn-out chainrings or change out gearing with SRAM's Yaw Compatible Inner Chainring. This solid ring is crafted from aluminum using SRAM's X-Glide tooth profiles for quick, responsive shifting. This chainring works for SRAM's Yaw front derailleurs on both 10- and 11-speed drivetrains. The 42-tooth version works best when paired with a 55- or 54-tooth big ring.
SRAM Road Inner Chainring (Compact)
$21.99 - $26.00
SRAM's road chainrings are stamped from 7075 aluminum for low weight and excellent strength. The teeth are ramped for precision shifting, too.
SRAM X-Sync 2 Eagle Direct Mount Chainring
$99.00
The radical look and feel of SRAM's X-SYNC 2 Eagle chainring is a direct result of SRAM drivetrain engineers studying the performance and wear characteristics of thousands of X-SYNC chainrings. They subjected every size of chainring to untold environmental and mechanical tortures, abuse and neglect, in both lab and real-world settings, to come up with a chainring that would augment the Eagle drivetrain’s performance in all conditions. The longer, positive-rake tooth shape has been designed to work perfectly with the Eagle chain to increase chain retention and overall pedaling efficiency, while decreasing friction, noise and wear.
SRAM X-Sync EX1 Chainring
$21.00
The EX1 drive train was designed specifically for the demands of electric-assist mountain bikes: a wide gear range with bigger jumps between gears and sturdy components to handle higher torque loads. Liberal use of features found on SRAM’s high end MTB parts provide high value, quiet operation and ease of service. - X-Sync (wide-narrow) tooth profiles for great chain management - Compatible with Bosch mid-drive E-bike systems - Material: Steel - Size/BCD: Direct mount - Recommended Group: EX1
Race Face Light Bash Guard
$34.99
Race Face Light Bash Guard Chainring Guards • Machined from AL-7075 • Compatible with all current and older Race Face cranks • Designed to protect your middle and inner chainring from impacts • Manufactured from bombproof, heat treated aluminum • CNC profiling gives a 25% weight savings over 'cookie cutter' bash rings • 4 bolt (104 BCD) configurations to cover rings from 32T through 40T
Race Face Cinch Direct Mount Narrow-Wide Chainring
$69.99 - $74.99
Race Face Next SL Direct Mount Chainrings • 7075-T6 aluminum, aerospace grade strength • Compatible for 9, 10, and 11 speed • Narrow Wide tooth profiling ensures ultimate chain retention • Attaches as part of the Race Face CINCH system (using tool TL6800) allowing you to switch between Direct Mount rings/spiders with ease • Utilizes Race Face proprietary spline design • Stiff 4mm plate thickness to transfer loads without flexing • 41 grams(26T) ranging up to 82 grams(36T) • Compatible with Race Face cranks with CINCH system interface
Wolf Tooth Components Direct Mount Chainrings for Race Face Cinch
$78.00
These chainrings are for Race Face Cinch cranks such as Turbine, Next SL, Sixc & Aeffect. The Wolf Tooth Cinch rings feature a our patented Drop-Stop design for the best wear life, chain retention and mud clearance. We have both Boost and standard chainrings. - CNC machined aluminum ring fits Race Face cranks with Cinch System - Features Drop-Stop tooth design to prevent unwanted chain drop - Asymmetrical tooth shape for the best wear life, chain retention and mud clearance - Recommended for use with 10 or 11sp chain (10sp chain works on 9sp drivetrain) - Made in the USA from 7075-T6 aluminum alloy
Surly MWOD Inner Chainrings (Stainless)
$28.00 - $30.00
Surly's MWOD Inner Chainrings are made from stainless steel for extreme durability. These rings are compatible with Surly's MWOD cranks.
Surly MWOD Bash Guard
$45.00
This aluminum bash guard is compatible with Surly's MWOD cranksets. Keep rocks and roots away from your chainring teeth and ride on.
Surly MWOD Outer Chainring
$65.00
Surly's MWOD chainrings convert your Mr. Whirly crankset into an offset mountain double crank. In simple terms, they allow your fat bike to run an extra wide rear tire and rim combo (for example, 4.7-inch tires on 100mm rims or 82mm rims on your Pugsley) while avoiding chain-on-tire rub. This outer chainring bolts directly to the inner ring with four chainring bolts.
SRAM XX1 X-Sync Chain Ring
$94.00 - $131.00
SRAM's XX1 X-Sync Chain Ring mates perfectly to SRAM's XX1 crank. It features a wide-narrow-wide tooth profile to securely hold the chain through the roughest terrain, no chainguide necessary. A variety of sizes ranging from the spin-to-win 28T to the hard-man humbling 38T let you dial in your rig for your strengths or terrain. The unique chainring design allows you to slide slide over the crank arm, so crank removal is not required.
SRAM Force X-Glide 11-Speed Chainring -130 BCD
$140.00
Replace worn out chainrings or change out gearing with SRAM's Force X-Glide Chainring. This solid ring is crafted from aluminum using SRAM's X-Glide tooth profiles for quick, responsive shifting.
SRAM Force X-Glide 11-Speed Chainring -110 BCD
$134.00 - $140.00
Replace worn out chainrings or change out gearing with SRAM's Force X-Glide Chainring. This solid ring is crafted from aluminum using SRAM's X-Glide tooth profiles for quick, responsive shifting. If you have a SRAM Force 22 compact crank (50/34), this is the ring for you.
Chromag Sequence X-Sync Chainring
$75.00
Chromag's Sequence chainring uses X-SYNC technology licensed from SRAM for unmatched chain retention. So now, no matter what kind of riding you do, you can have the peace of mind that your chain will stay put, and you can give your bike a little extra flair with the timeless Chromag styling. •104mm BCD
Race Face Turbine 10-Speed Chainring Set (104/64 BCD)
$129.99
• New asymmetrical tooth profiling and more upshift and downshift zones yield instantaneous, smooth and quiet shifting • CNC-machined from super-hard AL-7075 to maximize wear resistance and impact strength • Three times stiffer than Team and Race rings • 3x10 chainrings are compatible with 9-speed drivetrains if a complete set is used • Double chainrings bolts are included with all Race Face chainring sets
Race Face Narrow-Wide Chainring
$64.99
Race Face Narrow-Wide Single Chainrings for 9-11 speed drivetrains. • 7075-T6 aluminum, aerospace grade strength. • Compatible with 9, 10, and 11 speed • Narrow Wide tooth profiling ensures ultimate chain retention • Stiff 4mm plate thickness and I-beam construction transfer loads without flexing • Reversible laser etched graphics • 36t = 50g
Shimano Ultegra Chainring
$169.99 - $189.99
Shimano's Ultegra 6800 chainrings provide confidence-inspiring shifting and category-defining speed. Cold-forged aluminum comprises the super-stiff, hollow outer ring, and Shimano's unique system of ramps and pins means lightning fast shifts are at your command.
SRAM CX1 X-Sync Chain Ring
$89.00 - $144.99
Mud and moving parts are enemies in the sport of cyclocross. That's why SRAM decided they were going to simplify things. Remove the front derailleur, increase the range of the cassette, make dropped chains a thing of the past, and you've got a cross drivetrain worthy of hammering. SRAM's CX1 X-Sync Chain Ring is an integral part of that system. It mates to 110 BCD cranks and features a wide-narrow-wide tooth profile to securely hold the chain through the roughest terrain. It's also specially designed with mud clearing in mind to keep your rig light and fast. A variety of sizes ranging from the spin-to-win 38T to the flat-out 46T let you dial in your rig for your strengths or course.
Page 1 of 5 Next page