Filter By:

  • Show More Brands
  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Parts

Delta Stem Raiser
$29.99
- Clamps to a threadless steerer, offers up to 3-1/4" stem height increase - Forged 6061 aluminum - Threaded alloy top cap
Paul Component Engineering Neo-Retro Cyclocross Brake
$113.00 - $125.00
- Compatible with drop bar levers and short pull mountain bike levers - Modeled after the popular Mafac Tandem cantilever - Sealed pivot system with adjustable spring tension and Kool Stop pads - Recommended for standard pull (not linear pull) brake levers - Made in USA
Paul Component Engineering Motolite Linear Brake
$137.50
- Reversible 6061 aluminum arms for left or right cable routing - Quick-release noodle is lined with Teflon for smooth action - High tension square wire springs - Thinline threaded pads with easy-to-adjust arm hardware - Made in USA
Surly Narrow Wide Chainring
$65.00
An issue many people ran into when they began using 1x setups was chain retention with the front chainring. In the beginning of the 1x movement, many companies dealt with this by using aftermarket chain keepers that somehow bolted to the frame. Many people discovered that using a narrow-wide chainring in conjunction with some type of 'clutch' rear derailleur helped abate or eliminate these chain-jumping issues. Narrow-wide rings use alternating tooth profiles that more positively engage the chain and help control a deflecting chain in bumpy conditions. Your friends at Surly have partnered with SRAM to bring you stainless steel X-Sync chainrings. Stainless Steel is durable. This durability is pretty useful when you're talking about the one ring that is bearing the brunt of all your miles.
Surly Stainless-Steel Chainring (104mm BCD)
$30.00
Surly's Stainless Steel Chainrings last longer than their aluminum brethern because the 304 grade metal they use is 35% stronger. The rings aren't pinned or ramped so when one side starts to wear you can flip it around and pedal some more! They work great with singlespeed, fixed, and 1x9 applications, and the teeth are 2.2 - 2.3mm thick so they work well with wider chains.
Surly Stainless-Steel Chainring (130mm BCD)
$48.00 - $62.00
Surly's Stainless Steel Chainrings last longer than their aluminum brethern because the 304 grade metal they use is 35% stronger. The rings aren't pinned or ramped so when one side starts to wear you can flip it around and pedal some more! They work great with singlespeed, fixed, and 1x9 applications, and the teeth are 2.1mm thick so they work well with 9-speed chains.
Brooks B135
$200.00
Brooks' most heavily sprung saddle, the B135 will transform the roughest city street into a smooth and elegant glide across town. The suspension is thanks to double coil rear springs and a double loop front spring. And, of course, the B135 features Brooks' full-grain, premium tanned leather and trademark rivets for the ultimate in comfort, style, and durability.
SRAM Locking Foam Grips
$19.00
SRAM's Locking Foam Grips offer the soft feel of foam with the easy installation and security of a lock-on grip.
SRAM PG-850 8-Speed Cassette
$24.99 - $38.99
When it's time to replace your old 8-speed cassette, check out SRAM's PG-850. Its steel construction and SRAM's PowerGlide technology combine to deliver miles of solid shifting and outstanding durability.
Ritchey Comp EvoMax
$49.95
Twelve degree flared drop means forearm clearance when in the drops and greater leverage than a non-flared bar. Ritchey's Comp EvoMax is the ideal shape for on- or off-road builds from a mixed-terrain road bike to cross to mountain! - Evo Curve shaped top with 12-degree flare of the drops - Double butted 6061 alloy - Drop/Reach: 120/73mm - 12 degree drop flare - 4.7 degree sweep, 0 degree flare - BB Black finish - 292g (42cm)
Cane Creek Thudbuster Seatpost
$164.00 - $174.00
Cane Creek's Thudbuster Seatpost adds comfort to any hardtail bike. Using a parallel-linkage design, the Thudbuster moves down and back at the same rate as the rear wheel moves forward and up when you hit a bump, helping you maintain control. The post and linkage is made of aluminum with Teflon coated steel bushings so you know it's built to last. And, the interchangeable elastomers (sold separately) can be easily exchanged to your preferences.
Avid BB7 MTB Mechanical Disc Brake
$81.00 - $87.00
Avid's BB7 is the mechanical-disc brake that raises the bar. It boasts dual pad-adjustment knobs and Avid's ingenious Tri-Align caliper-positioning system so you can dial in perfect braking in seconds. The BB7 also utilizes precision actuation and variable spring tension to give you serious stopping power and out-of-this-world modulation. And, this setup comes with Avid's CleanSweep rotor for consistent, powerful braking and tool-free pad replacement for easy maintenance.
Terry Gel Saddle Cover
$29.00
For use in the gym or on the road, a Terry gel saddle cover can be a lifesaver when dealing with bad exercise bikes and uncomfortable bike saddles. - Contoured shape with a center depression strategically located for pressure relief against soft tissue area - Gel insert made of a semi-fluid polymer that supports and distributes the pressure of your weight, absorbing road shock and vibration - Synthetic nylon-Lycra cover can be wiped down with damp cloth - Secures with a tie/tether over standard bike seats up to 7" in width, 10" in length
Profile Design Bar Wrap (Splash Colors)
$11.99 - $12.00
Give your bike some personality and a comfy ride with Profile Bar Wrap. This beautiful handlebar tape will definitely make you stand out in a crowd. And, with extra stretch and length, it's easy to wrap, too!
Avid BB5 Mechanical Disc Brake
$52.00
Avid takes entry level to a whole new level with the BB5s, which feature ball bearings (where the BB comes from in the name), a melt-forged body and a CleanSweep rotor for excellent stopping power and awesome durability. Plus, an inboard pad adjustment knob lets you dial in the perfect distance between the rotor and the pads, while Avid's ingenious Tri-Align caliper-positioning system perfectly aligns the pads parallel to the rotor in seconds. And, the tool-free pad replacement and adjustment makes quick work out of accommodating for pad wear, so you always have positive, powerful braking.
SRAM PC-850 8-Speed Chain
$19.99
SRAM's PC-850 Chain makes a trusty partner over hill and dale. It's easy to install, too, thanks to the no-tools-needed PowerLink. Quiet, smooth, reliable and very affordable, the PC-850 is a fine value.
WTB Dual Compound Trail
$11.95
WTB's Dual Compound grips are perfect for XC, trail and comfort riding. They feature plush outer gel and tight, twist-resistant bases for comfort and control. And, the linked, diamond-shaped WTB logos and slightly raised centers provide an ergonomic feel and maximum grip in tough conditions.
Avid Speed Dial 7 Single Brake Lever
$14.99
Stiff, light and beautiful, Avid's Speed Dial 7 Brake Levers deliver excellent speed control and a great feel for your linear-pull or mechanical-disc brakes. And, they also feature adjustable reach for maximum hand comfort and are made to bend, not break, in the event of a crash. Plus, by turning Avid's Speed Dial knob, you can precisely tune the feel of your brakes any time without tools. This ambidextrous lever can be used as a front or rear lever, too.
Whisky Parts Co. No.9 Carbon Disc Cyclocross Fork w/Fender Mounts
$520.00
When a fork isn’t designed well, you feel it from the minute you start your ride. That is why Whisky poured over every detail, pushed the limits, and broke new ground during the creation of the No.9 Carbon Disc Cyclocross Fork. It eliminates uncomfortable chatter and vibration for an astoundingly plush ride. The delightfully stiff and compliant UD carbon fiber construction, disc brake mounts, and a stiff, secure thru-axle ensure low weight and precise braking and handling. Plus, fender mount means you'll be bounding out the door on even the rainiest days. It all results in an enhanced riding experience and adds up to performance that you can count on. - Axle to Crown Length: 395mm - Brake Mount: Post Mount 140mm - Crown Race: 40 - Front Axle: 15 x 100mm - Material: Carbon - Maximum Tire Clearance: 45mm - Offset: 45mm - Rotor Size: 185mm - S.H.I.S. Stem Clamp Diameter: 28.6 - Steerer Tube Length: 300mm - Steerer Type: Tapered - Wheel Size: 700c
Bontrager Satellite Plus IsoZone Handlebar w/Satellite inForm Grips
$69.99
Bontrager's Satellite Plus IsoZone Handlebar w/Satellite inForm Grips is a great set of handlebars and grips in one package. This system offers excellent comfort by providing suspension for your hands with Bontrager's built-in IsoZone elastomer inserts in the ends of the bars, that disperse pressure, neutralize vibrations and absorb impacts. Meanwhile the inForm grips have an ergonomic shape for excellent support and to eliminate pressure. Together, this system improves comfort by nearly 30%, for a difference you'll love mile after mile.
Surly Constrictor Seatpost Clamp
$15.00
If you're suffering from a slipping seatpost, Surly has the remedy. The Constrictor Seatpost Clamp grabs your post tight and hangs on for dear life. It's machined from anodized aluminum billet, uses an 8mm bolt for ultimate strength, and can accommodate a rear cantilever brake hanger.
Problem Solvers Cable Doubler
$59.99 - $90.00
The Problem Solvers Cable Doublers are made of light, durable machined and anodized aluminum and they are Teflon coated for a super-smooth cable pull every time. They come in two models. The first allows you to control two brakes with one lever. The second allows you to control one brake with two levers. Why? Well, there are myriad applications: tandems, cyclocross bikes, fixies, tricycles, recumbents, cycles for those with special needs, bike polo bicycles, those 4-person bikes you see on beach boulevards, and so on. You could even link both models of Cable Doublers together for the ultimate in redundancy!
SRAM PowerLock Link Chain Connector
$4.99 - $5.99
Power links provide tool free chain assembly. - Chain Compatibility: SRAM - Reusable: No
Bontrager Commuter Comp Bike Saddle
$44.99
A fitness saddle that combines a full cut-out with air foam and a dual density shell for comfort and support on every ride. The Commuter Comp saddle offers the comfort of a full cutout saddle with the support of a saddle designed specifically for commuters and fitness riders. A durable, weather-resistant cover material protects the dual density shell and air foam construction of the saddle for long-lasting comfort wherever you ride. Plus, a simple integrated Blendr mount makes it easy to add a Bontrager Flare rear light. - Fitness Posture 4 features an upright pelvic rotation to go farther, faster - Contour Relief Zone Plus (CRZ+) full saddle cutaway enhances soft tissue protection - Dual-density shell and air foam construction is soft yet supportive - Tough, weather-resistant cover repels water - Blendr attachment allows for integrated rear light mounting
Problem Solvers Quick-Release Nut Light Mount
$25.00
The Problem Solvers Quick-Release Nut Light Mount is an ingenious solution when your handlebars are too crowded to accept a light. This fine CNC-machined aluminum post simply screws on in place of your left, front quick-release nut to provide a great place to mount your light. Lower light mounting improves your depth perception and shows more details of the road condition ahead, too.
Salsa Guide Deluxe Alloy Seatpost
$65.00
The Salsa Guide Deluxe Seatpost is premium aluminum: lightweight, strong, and drama-free. Count on it to be there when you need it. - 2014 Aluminum shaft - Two-bolt head
BOX X-Ray Brake Shoes
$24.00
- Cold forged, CNC-machined cartridge body with self-aligning pivoting posts - Triple-compound 70mm pads
Bontrager XR Endurance Comp Grip
$19.99
Take the long way with the XR Endurance Comp grip. A contoured shape provides comfort and support, while an opposing tread pattern ensures your palms are padded and your fingers remain confidently in place. This Dual-Density grip features a lightweight, durable lock-on design that securely attaches to any bar. Key features - Contoured design comfortably supports palm to decrease fatigue - Opposing tread design absorbs shock in palms with a biting grip in fingers - Dual-density compound design provides secure grip, control, and comfort - Continuous tread design optimizes grip for moisture management and shock absorption - Lock-on clamp securely holds grip core to bar, eliminating slipping
Bontrager Grippytack Handlebar Tape
$29.99
- Grippy texture for consistent no-slip grip - Ideal stretch for quick and easy installation - Shock-absorbing foam for added comfort - Finishing strips and reflective Bontrager bar end plugs included - Adhesive backing
ESI Chunky Grips
$18.99
- Lightweight silicone grips that conform to your hand for maximum grip and shock absorption to reduce hand fatigue and arm pump - UV resistant and non-porous, they will not fade or harden - Non-slip grip compound that stays put even when wet - Fit XC: 13
Problem Solvers Handlebar Clamp Shim
$9.99 - $13.85
The Problem Solvers Handlebar Clamp Shim allows you to fit almost any handlebars in almost any stem. It's machined of light and durable aluminum and grooved on the inside to hold tightly.
Jagwire Mountain Pro Semi-Metallic Disc Brake Pads (Avid)
$23.99
Pro Semi-Metallic pads feature a lightweight aluminum backing plate attached to the same quiet and high-performance compound found on Jagwire's Sport Semi-Metallic series disc pads. Weight is reduced by nearly 50%. These pads are perfect for cross-country applications.
KMC MissingLink Connector
$15.00 - $60.00
- Allows quick chain removal without tools - MissingLink 410HD|~|1sp|~|BMX Heavy Duty chain|~|9.4mm|~|each|~| - MissingLink 410|~|1sp|~|BMX|~|8.6mm|~|each|~| - MissingLink II|~|8sp|~|all|~|7.1mm|~|6/card|~| - MissingLink-9|~|9sp|~|all|~|6.6mm|~|6/card|~| - MissingLink-10R|~|10sp|~|KMC, Shimano, SRAM|~|5.9mm|~|6/card|~| - MissingLink-10CR|~|10sp|~|Campagnolo only|~|5.9mm|~|6/card|~| - MissingLink-11|~|11sp|~|Campy, KMC, Shimano|~|5.5mm|~|6/card|~|
Shimano Deore XT Shadow + Rear Derailleur (Long Cage)
$99.99
Shimano's Deore XT Rear Derailleur uses cold-forged construction and cutting edge technology to deliver crisp shifting, real-world reliability, and trademark precision. Plus-type derailleurs use a lever-actuated clutch spring to prevent chain slap, reduce noise while on the trail, and improve chain engagement when riding over rough terrain. Sealed pulley bearings keep things spinning smoothly, and wide plate construction prevents the derailleur from getting clogged with mud and debris.
Bontrager Cruiser CRZ+ Saddle
$49.99
Bontrager's Cruiser CRZ+ Saddle will have you riding like a king. It's extra wide and it's the perfect throne for adding a plush feel and generous support to your bike. The extra deep center cutout and bump-busting springs out back pamper you in royal luxury each and every ride.
Avid FR-5 Single Brake Lever
$11.00
Light and smooth, Avid's FR-5 Brake Levers deliver excellent speed control and a great feel. They're compatible with linear-pull and mechanical-disc brakes. And, they also feature adjustable reach and are made to bend not break in the event of a crash. This ambidextrous lever can be used as a front or rear, too.
Bontrager SSR Grips
$9.99
Bontrager's SSR Grips are made from a dual compound: the hard inner core eliminates slippage on the bars, the soft outer layer provides great grip and all-day comfort in any condition.
Shimano Ultegra 10-Speed Cassette
$70.99 - $99.99
Shimano's Ultegra 10-Speed Cassette delivers pro-level shifting and durability. The computer-enhanced tooth shapes and tough cogs mean you can shift quickly, precisely and smoothly even under pressure.
Brooks B17 Standard
$135.00
Globally renowned and truly timeless, the B17 Standard is the saddle that secured Brooks' place in cycling history. It's been in constant production since 1910, providing cyclists around the world with over one hundred years of sublime support and unrivaled comfort. Each B17 Standard shapes itself to its rider, leading to a personal, customized saddle that fits like no other. And of course, it features Brooks' full grain, premium leather top secured by their trademark rivets for the ultimate in style, comfort, and durability.
Bontrager Sport Saddle
$34.99
Key features: - Fitness Posture 4 features an upright pelvic rotation to go farther, faster - Contour Relief Zone Plus (CRZ+) full saddle cutaway enhances soft tissue protection - Tough, weather-resistant cover repels water - Sleek, supportive padding provides comfort while maintaining performance
Wheels Manufacturing Inc. Derailleur Hanger 44
$32.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt
Wheels Manufacturing Inc. Derailleur Hanger 141
$34.50
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M8 Chainring Bolts Note: DROPOUT-141 does not have threads in the wheel axle hole.
Wheels Manufacturing Inc. Derailleur Hanger 123
$32.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M4x8 Flat Head Screws
Wheels Manufacturing Inc. Derailleur Hanger 146
$32.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (3) M3x8 Flat Head Screws - Specialized Part #9890-4226 Note: This hanger has been updated to match Specialized Part #9890-4226 and will accommodate 28-tooth and larger cassette cogs. Shifting with smaller cassette cog ranges will not be adversely affected.
Wheels Manufacturing Inc. Carbon Fiber Headset Spacer Kit
$160.00
- Black carbon fiber weave headset spacers for tuning ride height, no logos - Kit includes 1-1/8" spacers: (15) 2.5mm, (25) 5mm, (16) 10mm, (2) 15mm, (4) 20mm
Wheels Manufacturing Inc. Retainer Bearing Kit
$109.99
- Includes stock replacement retainers for headsets, bottom brackets and hubs - Headsets: (8) 5/32"x22, (8) 5/32"x16, (8) 3/16"x15, (24) 5/32"x20; - Bottom brackets: (12) 1/4"x9, (16) 5/16"x9, (16) 5/16"x10 - Hubs: (8) 3/16"x7, (16) 1/4"x7
Wheels Manufacturing Inc. BB86/92 Zerø Ceramic Bottom Bracket
$125.00
Wheels Mfg original BB86/92 bottom bracket is a significant upgrade to any OEM BB86 bottom bracket. Two machined aluminum cups offer increased durability and bearing life, while keeping a simple press together method for installation and maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement. - Bearings: Enduro ZERØ Ceramic - Color: Red - Bottom Bracket/Frame Interface: BB86, BB92 - Bottom Bracket Shell Width (mm): 86mm - 92mm - Bottom Bracket Shell I.D.: 41mm - Crank Spindle Type: HollowTech II (Shimano, FSA, Etc.) - Crank Spindle Diameter: 24mm - Weight: 95g
Wheels Manufacturing Inc. BB30 Outboard Zerø Ceramic Bottom Bracket
$125.00
The Wheels Mfg BB30 Outboard bottom bracket will give you all of the same benefits as their other Outboard style BBs. The two machined aluminum cups thread together ensuring the bottom bracket remains stable in the frame, increasing bearing life, and simplifying maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement. Specifically designed for installing 24mm spindle diameter cranks (Shimano, FSA, Etc.) in BB30 frames without the need for adapters. - Bearings: Enduro ZERØ Ceramic - Color: Red - Bottom Bracket/Frame Interface: BB30, Specialized Alloy OSBB - Bottom Bracket Shell Width (mm): 68mm - 73mm - Bottom Bracket Shell I.D.: 42mm - Crank Spindle Type: Shimano Hollowtech II, FSA MegaExo, RaceFace EXI - Crank Spindle Diameter: 24mm - Weight: 122g
Wheels Manufacturing Inc. PF30 Outboard Zerø Ceramic Bottom Bracket
$125.00
The Wheels Mfg PF30 Outboard bottom bracket will give you all of the same benefits as their well-loved Outboard style BBs. The two machined aluminum cups thread together ensuring the bottom bracket remains stable in the frame, increasing bearing life, and simplifying maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement. Specifically designed for installing 24mm spindle diameter cranks (Shimano, FSA, Etc.) in PF30 frames without the need for adapters. - Bearings: Enduro ZERØ Ceramic - Color: Red - Bottom Bracket/Frame Interface: PF30, Specialized Carbon OSBB - Bottom Bracket Shell Width (mm): 68mm - 73mm - Bottom Bracket Shell I.D.: 46mm - Crank Spindle Type: Shimano Hollowtech II, FSA MegaExo, RaceFace EXI - Crank Spindle Diameter: 24mm - Weight: 156g
Wheels Manufacturing Inc. Derailleur Hanger 255
$39.99
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - (1) M4x16 socket head screw included
Wheels Manufacturing Inc. Derailleur Hanger 247
$45.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - (3) M4x8 Flat head screws included
Wheels Manufacturing Inc. Threaded To 30mm Angular Contact Bottom Bracket
$75.00
Wheels Mfg solution for running a 30mm spindle crankset in a BSA threaded frame. Machined aluminum cups thread in to a standard threaded frame and feature Enduro 6806 ABEC-3 sealed bearings outboard of the BB shell. Fully serviceable. Notes: - For use with BB30 Wide 30mm diameter cranks with a spindle length of at least 104mm. - Will not work with standard BB30 cranksets. PLEASE MEASURE YOUR BB30 CRANK SPINDLE LENGTH! - Use only bottom bracket tools compatible with 16-notch MegoEvo BB’s. (FSA MegaEvo and Park Tool BBT-29). - Bearings: Enduro Angular Contact - Color: Black - Bottom Bracket/Frame Interface: ISO/English or BSA Threaded (1.37 in x 24 TPI) - Bottom Bracket Shell Width (mm): 68mm - Bottom Bracket Shell I.D.: 33.6-33.9 mm - Crank Spindle Type: BB30 Wide, BB30a, 386EVO, Rotor 3D+, SRAM BB30 Wide - Crank Spindle Diameter: 30mm - Crank Spindle Length: At least 104mm - Weight: 100g
Wheels Manufacturing Inc. Derailleur Hanger 257
$38.50
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Jamis #65-0003 - (1) M8 Chainring bolt included Note: For 12x142mm Thru Axle hub/dropouts.
Wheels Manufacturing Inc. Derailleur Hanger 284
$32.00
Replacement derailleur hanger for Specialized Diverge, CruX and Roubaix Carbon with Specialized SCS 135x12 thru-axle system. All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - (1) M5x10 Socket head screw included
Wheels Manufacturing Inc. PressFit 30 Bottom Bracket Angular Contact Bearings
$79.00
The Wheels Mfg original PF30 bottom bracket is a significant upgrade to any OEM PF30 bottom bracket. Two machined aluminum cups offer increased durability and bearing life, while keeping a simple press together method for installation and maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement. - Bearings: Enduro Angular Contact - Color: Black - Bottom Bracket/Frame Interface: PF30, BB386EVO, Specialized Carbon OSBB, BBRight" Press Fit - Bottom Bracket Shell Width (mm): 61mm to 86.5mm - Bottom Bracket Shell I.D.: 46mm - Crank Spindle Type: BB30 - Crank Spindle Diameter: 30mm - Weight: 112g
Wheels Manufacturing Inc. Derailleur Hanger 105
$27.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt
Wheels Manufacturing Inc. Derailleur Hanger 40
$31.99
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M6 Chainring Bolt
Wheels Manufacturing Inc. Derailleur Hanger 52
$32.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt Note: Same hanger as Wheels Mfg DROPOUT-25.
Wheels Manufacturing Inc. Derailleur Hanger 61
$27.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M4x8 Flat Head Screws Notes: - PLEASE NOTE! M4 HOLES ON HANGER ARE NOT THREADED! - FRAMES USING THIS HANGER HAVE THREADS IN DROPOUT!
Wheels Manufacturing Inc. Derailleur Hanger 68
$27.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt
Page 1 of 61 Next page