Parts & Accessories

$6.99
Product details
- Compatible with USB rechargeable Flare taillights and all Ion headlights
- Fits handlebars/seatposts 22.2-35mm and Ride Tuned Seatmast Caps
- Silicone body with a tooled adjustment clamp diameter
- When rotated for a Flare, the bracket is angled to compensate for an angled seat tube
- 25g

$39.99
$49.99
20% Off
Welcome to the future
The Transmitr Remote wirelessly controls up to seven Transmitr ready devices. It easily attaches to any bike's handlebars for convenient on the bar control of all Transmitr lights.
The ANT+ enabled Transmitr remote is compatible with all Transmitr products and allows for wireless on/off, mode selection, real time light battery status, and more.
- Transmitr remote can simultaneously control up to 7 lights
- ANT+ enabled for use with all Transmitr products
- Use Transmitr system for wireless on/off, mode selection, and more
- Can be used with multiple Flare RT lights for turn signal configuration
- Includes CR2032 battery, mount, and quick-start manual

$4.99
Put a Flare almost anywhere
- For use with all Flare tail lights
- Perfect for attaching to a seat pack, belt, backpack, or anything with a loop
- 2g

$4.99
Quick, easy straps for your Flare and Ion lights
Product details (Front - Ion)
- Fits all Ion headlights
- Works best with 22.2 - 35.0mm handlebars
Product details (Rear - Flare)
- Fits all Flare tail lights
- Works best with 27.2 - 31.6mm seatposts
- Includes 16 degree offset for optimized use on seatposts

$7.99
-Mounts easily to front racks with threaded M5 mounts
-Allows for unobstructed light positioning
-22.2mm clamping diameter

$19.99
Easily integrated
Designed specifically for specific Bontrager Circuit MIPS road bike helmets, the Blendr mount easily integrates Bontrager Ion lights and GoPro cameras.
- Quickly mount front light and camera accessories on the front of your Bontrager Circuit MIPS road bike helmet.
- Tested with an accelerometer for intended breakaway point if involved in a crash

$19.95
Gain more room or find the perfect position for lights, computers, music players, GPS, or whatever, with the Topeak BarXtender. Attaches securely to the handlebars or stem and adjusts for optimum position.
- Clamp: Fits 22-38 mm tubes (shims included)
- Crossbar: Device mount bar 25.4 mm
- Material: Engineering Grade Plastic and Steel
- Mount: Handlebar, Handlebar Stem
- Size (L x W x H): 18 x 3 x 3 cm, 7.1” x 1.2” x 1.2” (folded)
- Size (L x W x H): 13 x 10 x 3 cm, 5.1” x 3.9” x 1.2” (open)
- Weight: 116 g / 4.08 oz

$9.99
The NiteRider Adjustable Angle Tail Light Strap Mount was specifically designed for our flagship tail light, the Sentinel. It allows you to fine-tune the mounting angle of the light to display the projected Laser Lanes even and parallel on the ground. It's an easy on and off non-slip tail light mount that also features a grooved contact pad that makes this the 'go to' mount for riders using aero seat posts.
System Compatibility
- Sentinel
- Solas
- Sabre
- CherryBomb

$9.99
The NiteRider Lumina Handlebar Strap Mount offers a wide variety of handlebar size fitments and remains rock solid while riding through rough terrain. It’s easy to install and, like all NiteRider mounts, features a quick release tab for when it’s time to recharge or leave your bike unattended.
System Compatibility:
- Lumina Series
- Mako Series
- MiNewt Cordless Series

$9.99
The NiteRider Tail Light Rack Mount gives you the option to mount your tail light directly onto your rack-ready/-equipped bike via this rack mount accessory.
System Compatibility
- Sentinel
- Solas
- Sabre
- CherryBomb
- TL 5.0 SL

$3.99
Need to replace a strap on the compact Vis 180 Pro taillight or the front mount of the Vis 360 Pro? This is a durable direct replacement that installs in seconds and can be cut to the preferred length.

$29.99
Use Light & Motion's 2.0A USB AC Adapter to charge your light with a USB cable, using a standard wall outlet.
- Compatible with: Urban, Vis, Solite, Taz, GoBe

$19.99
The Nip fender mount is a clean, simple solution to mount the Nip e-Bike headlight above the wheel. This lower position is great for commuting in foggy/rainy conditions or if you simply want fewer mounts on your handlebar.
- Compatible with Nip e-Bike headlights

$3.99
Product details
- Replacement mounting strap for Bontrager Glo and Ember lights
- Silicone strap allows for quick installation and removal of light
- Fits 22.2 – 31.8mm handlebars, seatposts, and much more

$9.99
Setup a light wherever you can connect a GoPro mount. Use this adapter to connect your Taz to any GoPro mounting option.

$9.99
Replacement seat post mount for the Tuck e-Bike Taillight. Secure design with non-slip strap ensures light is stationary even in rough, bumpy terrain.
- Includes plastic wedge spacers to ensure Tuck mounts at optimum angle for premium visibility
$6.00
The Portland Design Works Mission Control 2.0 Headlight Mount is now easier to use! Wrap the heavy-duty UV-proof rubber strap around your handlebars and you're ready to blast off in seconds.
- Fits 22.0-31.8 mm diameter handlebars
- Compatible with all PDW headlights.

$15.99
Direct replacement for the mount on Taz lights. The simple but thoughtfully designed system cinches light to the bar to prevent movement in bumpy terrain.
- Two different rubber mount pads included to achieve the perfect fit depending if the handlebar is standard or oversize
- Includes strap and mounting hardware

$4.99
- Fits seatpost (up to 31.8mm) or seatstay
- Compatible with: Blinky 3,5,7, all Superflash lights and Blinky Safety rear light
- Use with Blinky Safety Front light bracket to fit oversize (~31.8mm) handlebars

$34.99
Handlebar mount for all systems that use the slider mounting clip. Fits handlebar clamp diameters from 25.4mm–35mm.
System Compatibility:
- Pro Series
- HID Series
- Classic Plus & Select
- Evolution & Digital Evolution
- HeadTrip & Digital HeadTrip
- TrailRat & TrailRat Select
- RoadRat
- Digital Patrol LED
- Digital Patrol
- Pre 2001 systems

$14.99
The Bontrager Blendr Saddle Mount makes riding safe easier than ever. All you need are two secure bolts to easily and cleanly attach compatible Bontrager Flare tail lights so you can always be seen when you ride.
- Blendr mount allows for integrated rear light attachment
- Easily and securely mounts to compatible saddles
- Includes mounting hardware (2—3mm M5 bolt)
- Torque included M5 mounting hardware to 2Nm

$9.99
Set up a light wherever you can connect a GoPro mount. Use this adapter to connect your Imjin or Nip to any GoPro mounting option.

$7.99
Blendr is the ultimate integration system for clean and easy installation of lights, computers, and other accessories. Start with a Blendr stem, add the appropriate base, and finish with the Blendr High Ion Light Mount for a clean, flush look that securely holds your Bontrager Ion light above your stem to see and be seen.
Key features:
- Blendr is an elegant, integrated accessory mounting solution
- Provides clean and secure mount for Bontrager Ion headlights
- Works with any Blendr-compatible stem and the accompanying base
- For use with Blendr bases (Pro, XXX, XXX bar/stem, and select Elite bases)

$5.00
Mount your tail light to the reflector tab on the back of a rear cargo rack with this Rack Bracket from Portland Design Works.
- Compatible with all PDW rear lights except the Asteroid and Fenderbot
- Horizontal holes are 50mm apart to fit European rack standards
- Vertical holes are 18mm apart to fit most reflector mounts

$9.99
Vya redefines bike safety with smart, advanced features with an ultra-compact design. This innovative design allows you to mount the Vya Taillight to any GoPro interface attached to your bike rack.
- Innovative twist-lock system ensures Vya will lock into mount and not vibrate free
- Utilizes third-party GoPro mount interfaces designed for bike racks
- Compatible with Vya Pro Taillight and standard Vya Taillight
- GoPro base mount not included

$24.99
The ultimate mounting solution for the Vibe Pro Taillight. Securely mount Vibe to seat rails placing rear lighting at the highest part of the bike - optimum for visibility to motorists. Innovative design allows the Vibe to be adjusted in multiple angles for ideal placement. Additionally this mount solves common mounting issues when using an aero post, trunk bag, etc.
Features
- Higher mounting point increases rear visibility
- Innovative twist-lock system ensures Vya will lock into mount and not vibrate free
- Optimized for the Vya Pro Taillight for a sleek mounting orientation. The standard Vya Taillight is compatible but may interfere with accessories such as a seat bag

$9.99
Light & Motion's Vis 180 Aero Post Pad lets you easily attach your Vis 180 taillight to the back of your aero seatpost so you can be fast and visible.

$21.99
This adjustable mount provides an infinite range of angles and positions for handlebar placement of your Transmitr Remote.
The unique CNC Aluminum design allows for convenient placement and sturdy mounting to handlebars from 31.8-22.2mm.
- CNC alloy design provides light and stable mount
- Allows for infinite angle adjustment
- Compatible with 31.8mm - 22.2mm bars
- For use with Transmitr Wireless Remote
Page 1 of 3
Next page