RockyMounts StreetRod is a thru-axle adapter that works with fork-mounted bike racks from any manufacturer. It includes axles to accommodate bikes with 12x100, 15x100, and "Boost" 15x110 thru-axles.
Utilizing RockyMounts premium 3-axis anti wobble system; Allows BackStage, MonoRail, and SplitRail racks to fold flat against vehicles with spare tires. Works well for bike racks including Thule, Yakima & Kuat. Product Features: - Extends rack 8 inches from receiver - Only for 2-inch hitch receivers - Uses RockyMounts 3-axis anti wobble system - Reduces vehicle hitch capacity by 50% - Ideal for vehicles with spare tires, recessed hitches or van doors - Includes locking hitch pin with premium lock pod, can be keyed alike - 10lbs
The RockyMounts TomaHawk low-profile upright mount that's easy to use and even easier on your wallet. Fat-bike ready out of the box (up to 5" tires), and will hold all styles of bikes, road, mountain, cruiser, and childrens (20 - 29" wheels). Features: - No bike frame contact - simply ratchet the hook over the front wheel and secure the front/rear wheelstraps - Fat bike ready (up to 5" tires) out of the box. Includes two wheel strap extensions - Swingarm easily adjusts for driver side and passenger side installation - Mounts to all styles of crossbars - round, square, factory, aero - Holds all styles of bikes, 20 - 29" wheels (except those with front fenders) - New Easy-Load wheel straps make loading bikes easier than ever - Optional 2-pack locks (sold separately) lock rack to car and bike to rack
This is a one bike add-on to turn your MonoRail 2-inch (sold separately) into a three bike carrier. Simply remove the end cap from the MonoRail, slide the attachment in and it quickly secures with two bolts. The cable lock included with the MonoRail is long enough to secure all three bikes. Simply and easy. Not compatible with 1.25-inch MonoRail.
RockyMount's Brass Knuckles rack gets your bike from point A to point B with the minimum of hassle and the maximum of security. The aluminum arm uses finely indexed ratcheting to hold front bike wheels from 20- to 29-inches with widths from skinny road tires to fat DH monsters. Form-fitting mounting hardware plays nicely with almost any roof-mounted bars: round, square, or aero. When your bike isn't on the roof, the arm folds down for an extremely low profile for minimal wind noise and maximum gas mileage. For extra security, you can lock the bike to the rack and the rack to your car with lock cores (sold separately).
The little brother of the MonoRail, the MonoRail Solo is perfect for those who do not need all of the capacity but still want the versatility of it’s larger brother. Superlight with a 25 lbs rack weight, the solo is our easiest rack to take on and off a vehicle. Out of the box the MonoRail family has the widest carrying capacity of our line up, due to their ability to fit up to a 5” fat bike tire. The solo also has the added versatility of allowing for both 1.25” and 2” hitches out of the box. - Carries 1 bike, up to 60 lbs. Expandable to 2 bikes up to 45 lbs per tray, with Add-On - No contact with frame, secures bicycle by front wheel - Carries road tires up to 5.0” fat bike tires, and diameters from 20” to 29” - Compatible with bicycle wheelbases from 36” to 50” - Folds flat against the vehicle and tilts down 30 degrees to allow for hatch access - Fits both 1.25” and 2” hitches with adapter sleeve (included) & anti-wobble bolt - Includes locking hitch bolt, cable lock, and standard lock pods, keyed alike - Note: Cable lock is not intended to be used while driving. Road vibrations can cause unintended wear on frames, rims, and the rack itself. Please remove cable lock when vehicle is in motion - Not for use with fender equipped bicycles, or on Class I hitch receivers - Rack weight 25 lbs (shipping weight 35 lbs) - Fit Memo- For cargo vans a fit check is required. Depending on hitch manufacturer, handlebar width, vehicle wheelbase, and accessories an 8" Hitch Extension may be required for handlebars to clear the door.
The MonoRail is the most versatile rack in the RockyMounts line up. It has the capacity for all styles of bikes; from skinny tire road machines, up to heavy fat tire E-bikes, this rack has you covered. - Carries 2 bikes ONLY, up to 60 lbs per tray (120 lbs total). 1.25" variant is NOT compatible with Add-On - No contact with frame, secures bicycle by front wheel - Carries road tires up to 5.0” fat bike tires, and diameters from 20” to 29” - Compatible with bicycle wheelbases from 36” to 50” - Folds flat against the vehicle and tilts down 30 degrees to allow for hatch access - Includes anti-wobble hitch pin - If you want to fit both 1.25" and 2" size hitches, get the 1.25" and our adaptor sleeve. This configuration does not allow for the use of an Add-On - Includes locking hitch bolt, cable lock, and standard lock pods, keyed alike - Note: Cable lock is not intended to be used while driving. Road vibrations can cause unintended wear on frames, rims, and the rack itself. Please remove cable lock when vehicle is in motion - Not for use with fender equipped bicycles, or on Class I hitch receivers - Rack weight 39 lbs (shipping weight 51 lbs) - Fit Memo- For cargo vans a fit check is required. Depending on hitch manufacturer, handlebar width, vehicle wheelbase, and accessories an 8" Hitch Extension may be required for handlebars to clear the door
The BackStage is the first platform rack that offers full access to the rear of the vehicle. Either empty or with one or two bikes loaded, the rack can be swung to the passenger side for full access to the rear of the car. Perfect for camping, #vanlife, dog owners or anyone that needs full access to the back of the car. RockyMounts tested on RVs, Sprinters, and Chevy Suburbans — the cantilevered arm swings out 41" so it works with all cars and trucks. - Fits tires up to 5.0”, bikes up to 48” wheelbase, wheel diameter 20”-29” - 3” of side-to-side tray adjustment avoids seat to handlebar interference - 13” spacing between bikes allows clearance for all fat bikes, including those with Bluto forks and 197mm rear spacing - 50lb max weight per bike with Add On (150lb max) - No bike frame contact - Compatible with MonoRail Swing and 2” MonoRail - Lifetime warranty
Simply insert Saris' Hitch Tite into the hitch receiver to give your Saris bike rack (sold separately) extra stability. The Hitch Tite is compatible with the Bike Porter Hitch 2-Bike, Freedom, Axis Steel, Axis Aluminum, Cycle-On, and T-RAX Sport racks.
Saris' Wheel Straps keep your front wheels from spinning and your handlebars from turning in the wind. They're made of tough nylon with easy-to-use buckle closures. Wheel Straps are sold in pairs.
Provides a clean and sleek look for your Saris Bones rack, these end caps allow excess strap length to be tucked neatly inside rack - Provides a clean and sleek look for your Saris Bones rack - Upgrade your current Bones or Bones EX rack (pre-2022) - Compatible with: Bones or Bones EX racks - Not compatible to use with any Bones Hitch racks or SUPERBones
Increase rack stability for a smoother ride, this clamp system securely tightens hitch rack to receiver. - Adds extra security to bike racks and hitch devices - Eliminates rattling and wobbling - Compatible with 2" receivers
Saris' Protect-O-Pads are foam blocks that separate and protect your bikes when multiple bikes are being transported. They come in packs of four.
Saris' Hatch Huggers fasten Saris racks (sold separately) to certain vehicles. They replace the regular straps for vehicles with glass hinge lines and vehicles with narrow gaps around the trunk.
Turn your hard to fit vehicle into a bike hauling machine, Hatch Huggers allow most Saris trunk mount carriers to be used on vehicles equipped with integrated spoilers or glass hatchbacks - Designed for cars that require a custom fit, including those with glass-hinge lines or surfaces that are difficult for traditional trunk rack hooks to secure to, such as plastic or squared off edges. - Hatch Huggers SL attach to your trunk rack using the existing j-hooks and straps - Quick and easy to install and attach to your Saris Trunk Rack. - Includes two bumpers that are compatible with existing rack straps and hooks for Saris trunk-mount bike racks. - Maximum capacity-two bikes, 35 lb. each, 70 lbs. total.
Saris' Trap Fork Mount can be bolted anywhere you need to hold a bike. It secures your bike's fork dropouts with a stout 9-mm quick-release skewer. The Trap is made of powder-coated, light, durable aluminum. A hole in its body allows your bike to be locked with a cable (sold separately).
Saris' Locking Hitch Tite adds both stability and security to your hitch rack. It tightens up the interface between your rack and hitch to combat swaying and it locks your rack to your vehicle. It fits 1-1/4 and 2-inch threaded hitch-tites and is compatible with the 200/500 Series T-Rax, all Thelma racks, standard-model Cycle-Ons, and all the T-Bones racks (each sold separately).
Saris' Locking Cable 8' keeps your bike and rack where you want them: attached to your vehicle. This braided, stainless-steel cable is 8-feet long for plenty of reach. Plus, the vinyl coating protects your vehicle's and bike's finish.
- Updated design, for use with all Saris racks where bikes are secured by the top tube - Bridges the gap from stem to seat tube, creating a virtual top tube - Useful on ladies and specialty frames
Don't leave your fat bike behind! Saris' Freedom Fat Tire Wheel Holders carry up to 5-inch-wide bicycle tires. Extra-long straps secure your bike to any Saris Freedom rack (sold separately).
Easy to move rack to/from vehicle without any lifting, this wheeled dollie attaches quickly t- most 2" receiver compatible racks - Wheels ensure smooth and effortless transport of rack to/from vehicle without any lifting - Connects to 2" stinger with simple pin - Works with most Saris hitch racks and other racks that bolt t- vehicle receiver - Easy to remove
Saris' Traps Wheel Holder mounts easily to your Saris Single or Triple Track (each sold separately) to keep your front wheel secured. It accepts the wheel with little or no quick-release adjustment. Mounting hardware is included.
Secure peace of mind and your trunk rack to vehicle with our Trunk Rack Lock. - Secure bike rack to vehicle to deter theft. - Cables secured within closed trunk. - Includes 8 ft. cable. - Includes 2 keys.
Bike fork mounts you can put anywhere, including truck beds, minivans and SUVs An all-in-one design that fits four thru axle spacing standards: - 15mm x 100mm - 15mm x 110mm - 12mm x 100mm - 20mm x 110mm - Mounts directly to any flat surface for bike transport or storage - Ultimate stability and versatility when mounted t- Saris Triple Track or Single Track (sold separately) - Mounting hardware not included
Easy to mount and a cinch to store in the back of your car, Saris’ Solo is a low-profile rack for peace-of-mind convenience. Solo’s uni-body frame has no adjustable parts, which makes it a no-brainer to set up. With its soft, rubber, pivoting feet and four hold-down straps, the Solo safely and securely attaches to your car. Two strong buckles and an integrated anti-sway strap keep your bike in place. As an added bonus, the Solo is built with 100% recyclable, non-rusting materials.
Give your bike first-class treatment on the way to the ride. Saris' Traps Single Track mounts easily on the floor of your cargo area or truck bed and holds 2 bikes. Included is mounting hardware for three Traps fork mounts (sold separately).
Don’t waste your weekend! Go explore with Saris’ Bike Porter Trunk 3-Bike rack. It’s outfitted with adjustable features to fit a vast variety of vehicles. Constructed of sturdy, durable steel, the rack’s frame has 15 different easy-to-adjust positions. It’s held in place by foam-padded legs and four straps, each with a smartly coated hook to protect your car’s finish. The bikes are held down with ratcheting, anti-sway straps and rest in protective, grooved rubber cradles, which allow the shift cables to slot down underneath and away from the top tube.
All the Essentials of a Reliable Trunk Rack With the Guardian bike rack, what you see is what you get. And what you see is a complete trunk rack, simplified to its purest form. Made with steel sourced from America's heartland, the Guardian is tough enough to stand-up to the elements, yet gentle on bikes. Easy-to-use bike hold downs with ratcheting straps grip the bike's frame, while rack straps equipped with spring-loaded buckles ensure a snug rack-to-vehicle fit. This simple trunk rack fits most sedans, hatchbacks and vans, and comes completely assembled. Just take it out of the box, put it onto the car, and you'll be rolling in no time. Features - Carries 2 bikes (35 lb./bike) - A Bike Beam may be required for frames without a horizontal top tube. - Trunk bike rack. - No assembly needed. - Bike hold downs with ratcheting straps separate and firmly hold up to 3 bikes. - Bike rack straps with spring-loaded buckles ensure secure rack-to-vehicle fit. - Rack arms adjust to fit most sedans, hatchbacks and vans. - American-made steel frame construction. - Folds for compact, convenient storage. - Coated hooks protect vehicle's finish. - Heavy-duty foam pads protect vehicle's finish.
What has 3 legs and the power to set you free? Saris' Bones 2-bike trunk rack. It's affordable, easy to use and just plain cool. Plus, it easily adjusts to fit most vehicles including hatchbacks and mini-vans. The non-marring, thermoplastic rubber foot pads adjust to the contours of your vehicle for stability. The Bones carries up to 2 bikes easily and accommodates a wide variety of frame styles. It's made from 100% recyclable materials making a super-tough rustproof rack. It folds for easy storage, too!
Simple. Reliable. American-Made. This entry-level 3-bike trunk rack gets you where you want to go. No frills, no complications—the Guardian is as simple as can be, without sacrificing security. Easy-to-use bike hold downs with ratcheting straps grip the bike's frame, while rack straps equipped with spring-loaded buckles ensure a snug rack-to-vehicle fit to keep precious cargo secure during transit. Plus, the Guardian 3-bike comes completely assembled and ready to go, right out of the box. What more could you ask for in a bike rack? Features - Carries 3 bikes (35 lb./bike) - A Bike Beam may be required for frames without a horizontal top tube. - Trunk bike rack. - No assembly needed. - Bike hold downs with ratcheting straps separate and firmly hold up to 3 bikes. - Bike rack straps with spring-loaded buckles ensure secure rack-to-vehicle fit. - Rack arms adjust to fit most sedans, hatchbacks and vans - American-made steel frame construction. - Folds for compact, convenient storage. - Coated hooks protect vehicle's finish. - Heavy-duty foam pads protect vehicle's finish.