Topeak's MTX BeamRack is an awesome way to add touring capacity to bikes that won't accept conventional racks, such as dual-suspension mountain bikes. The quick-release mount clamps firmly to your seatpost and this rugged rack boasts durable aluminum construction capable of supporting up to 20-pounds with ease.
This expedition-worthy rack is made from 4130 chromoly, so it's tough, light and easily repairable in the field. It's also height-adjustable, so you can get your center of gravity as low as possible for a stable ride. The provided stainless steel hardware enables you to attach your rack to virtually any frame with 26-inch, 700c and 29-inch wheels. And, it hauls up to 80 pounds of gear and is powder-coated to protect it from the elements.
Bontrager's BackRack Deluxe L is made for mountain and hybrid bikes with frame sizes 18 inches and over, and road bike frames 54cm and over. This durable and light rack is perfect for turning your bike into a commuter and errand-runner. Single-bolt strut mounts allow for maximum adjustablility and ease of installation. Plus, the BackRack Deluxe boasts side rails, making it compatible with standard trunk bags and panniers as well as Bontrager's Interchange models (sold separately).
Bontrager's BackRack Deluxe S is made for mountain and hybrid bikes with frame sizes 18 inches and under, and road bike frames 54cm and under. This durable and light rack is perfect for turning your bike into a commuter and errand-runner. Single-bolt strut mounts allow for maximum adjustablility and ease of installation. Plus, the BackRack Deluxe boasts side rails, making it compatible with standard trunk bags and panniers as well as Bontrager's Interchange models (sold separately).
Topeak's Explorer Tubular Rack is a great add-on for carrying a trunk bag, pannier or anything else you want to strap on. It's made of tubular aluminum, fits most bikes, and has a center strip that acts like a short fender, too.
Bontrager's BackRack L is made for mountain and hybrid bikes with frame sizes 18 inches and over, and road bike frames 54cm and over. This durable and light rack is perfect for turning your bike into a commuter and errand-runner. Tough and rustproof stainless-steel hardware is included and the single-bolt strut mounts allow for maximum adjustablility and ease of installation. And, the BackRack is compatible with standard trunk bags and panniers as well as Bontrager's Interchange models (sold separately).
Bontrager's BackRack I is made for mountain and hybrid bikes with frame sizes 18 inches and over, and road bike frames 54cm and over. This durable and light aluminum rack is perfect for turning your bike into a commuter and errand-runner. Tough and rustproof stainless-steel hardware is included and there are removable/adjustable eyelets for multiple mounting options. The BackRack is compatible with all panniers and Bontrager's Interchange trunk bags (sold separately).
Bontrager's BackRack S is made for mountain and hybrid bikes with frame sizes 18 inches and under, and road bike frames 54cm and under. This durable and light rack is perfect for turning your bike into a commuter and errand-runner. Tough and rustproof stainless-steel hardware is included and the single-bolt strut mounts allow for maximum adjustablility and ease of installation. And, the BackRack is compatible with standard trunk bags and panniers as well as Bontrager's Interchange models (sold separately).
Make your fat bike a load-hauling master with Axiom's Fatliner. It's disc compatible, and it's made from rugged 6061 T6 aluminum to keep strength to the max and weight to a minimum. There are plenty of mounting options to accommodate all sorts of fat bikes, and it fits dropouts from 170 to 190mm apart. Get fat, get loaded, and go adventure with the Fatliner.
Add more utility to your Electra Cruiser with the Cruiser Classic Rack. This aluminum rear rack features a sturdy design and attaches quickly and easily so you can bring along nearly anything your heart desires.
Get it to go with Portland Design Works' Takeout Basket. This handsome rack attaches to your handlebars for easy access to the included waterproof, removable roll-top bag. The rack is made from light, sturdy aluminum tubing and includes thoughtful features like an eyelet for mounting a light and a slot for carrying your u-lock (both sold separately). - Conveniently carry a six pack of bottles, five burritos, three chinchillas or an extra layer of clothing - Fits 25.4 - 31.8mm handlebars (even fits between drop bars) - Includes water resistant roll top bag that clips securely into basket - Eyelet for attaching light mount - Integrated u-lock carrying slot - Rugged, lightweight 10 mm alloy tubes - Rack weight: 500 grams - Inside of basket dimensions: 155mm x 255mm x 105mm - Lifetime PDWarranty
Set out on an adventure with Salsa's Alternator Rear Rack. Built for 135mm-spaced dropouts, this rack is constructed of sturdy, light 6061 aluminum and finished with a black powder coat. The Alternator features large pannier hook stops, extra long struts for an impressive fit range and it includes a mounting kit.
Thank Salsa's Down Under Front Rack when you're done with your tour or bikepacking trip. For a secure attachment, it mounts to your mid-blade eyelets on the fork and the dropout eyelets, while simultaneously keeping the center of gravity low. It's constructed from aluminum to keep the weight down. And, the Down Under Front Rack is even disc brake compatible.
A lighter duty version for MTB and commuter use. QR mechanism is secure and easy to use. 7 kg (15 lb) carrying capacity. Compatible with all MTX TrunkBags. Includes hidden storage tray, rubber bungee and safety reflector. - Clamp: Fits 25.4/31.8 mm (shims Incl.) - Bag Compatibility: MTX TurnkBags - Material: Aluminum beam / Plastic cargo deck - Max Weight Capacity: 7 Kilograms - Size: 51 x 12.5 x 9 cm / 20.1” x 4.9” x 3.5” - Weight: 688 grams
When it's time to ditch the backpack, the back soreness and the back sweat, look no further than the MSW Pork Chop Light Duty rack. It's got plenty of capacity for those key items on your journey. - W-bend stays keep pannier hooks in place - Fits most bikes with 26" - 700c wheels - Designed for bikes without disc brakes (for disc brake bikes, see RCR-100D) - Holds up to 40 lbs. of cargo - Top platform dimensions are 310mm x 112mm
The Fairdale Skaterack is a the simplest and easiest way to carry a skateboard on a bike. Tool free attachment to most any rear rack. Skateboard drops into the plastic coated rack and is held securely by a stretch cord. Rack positions board behind rear axle to leave plenty of room for heel clearance.
You'll keep on keepin' on with Planet Bike's K.O.K.O. Cargo Rack on your bike. Made of 6061 aluminum for maximum strength and stability, it boasts a wide range of adjustability so it's easy to install and fits most bicycles. There's a taillight mount, too (lights sold separately).
The Alternator 135 Low Deck fits Salsa 135mm-spaced, Alternator dropout equipped frames using a non-plus-sized tire. It features a lower and narrower deck that fits better over and around tires up to 29 x 2.1" (without fenders), as well as 700c and fender setups. - NOTE: Deck requires a minimum of 320mm clearance from seatstay mounting points - NOTE: Salsa Rack-Lock needed for frames without upper seatstay mounts - Tubular 6061-T6 aluminum construction - 135 x 345mm cupped deck - Extra-long struts for improved range of fit; straight and shaped (kinked) struts included - Black powder coat finish - 765 grams - Weight Limit (lbs): 59.5 lbs.
Load up and go! Salsa's Wanderlust HD Rear Rack is built from chromoly steel for real-world strength. A large deck teams up with multiple cross bars for securing panniers and other gear. To get you going, a mounting kit is included, and to help you stay visible, there's also a taillight mounting bracket.
The Down Under HD Rack is the recommended lowrider for world touring. Sturdy and dependable, the steel construction lends itself well to field repairs should a worst-case scenario occur. - Requires dual-sided, mid-blade mounts - Wide crossbars provide sturdy, secure attachment points for a pannier - Tubular 4130 CroMoly construction - Mounting system provides 35mm range of infinite adjustment to position the rack - Includes mounting hardware kit - Powdercoat finish - Maximum Recommended Load: 55lbs (25kg) - Sold in pairs - Requires inner and outer mid-blade eyelets
The Portland Design Works Bindle Rack is a seatpost-mounted rack designed to easily haul your gear on multi-day cycling tours or just across town. The rack is constructed of lightweight alloy and mounts to any size seatpost in seconds. Heavy-duty compression straps loop through saddle rails to carry your cargo. The Bindle Rack helps to prevent side-to-side sway while riding and rear wheel rub for riders with short seat posts. Place your tent, sleeping bag, drybag, or other gear directly onto the Rack platform and pull the compression straps tight to secure the load up against the bottom of your saddle. - Rack mount fits seatposts with diameters 22.0 - 31.6mm - Rack deck measures 133 x 343mm (5.25 x 13.5") - Total Rack length: 432 mm (17") - Rack weight: .35kg (13 ounces) - Rated to 5.34kg - Lifetime PDWarranty
You'll be able to haul a real payload with this strong rack from Portland Design Works. The Payload isn't just a pretty face, either. Its graceful curving supports and two-ply bamboo deck add strength to support a whopping 77 pounds of cargo. So you can bring everything along for the ride, from a week's groceries to the literal kitchen sink, you know, just in case. - Strong steel tubing - Double ply bamboo deck - Deck measures: 140 x 381 mm (5.5 x 15") - Height: 368 mm (14.5") - Weight: 1360 g (3 lbs) - Rated to 35 kgs (77 lbs)
This one-size-fits-all aluminum tubular rear rack is designed exclusively for Fat Bikes with disc brakes. The rack legs are adjustable to fit most 24” & 26” wheel Fat Bikes. The integrated side bar provides a lower pannier attachment point allowing more space for cargo on top of the rack. The MTX QuickTrack plate is compatible with any Topeak MTX TrunkBag, MTX rear basket, and most other rack packs and panniers on the market. Not compatible with asymmetric rearstay design fat bike frames.
Topeak's Disc-Mount Rack allows you to easily mount your BabySeat II or your Topeak MTX TrunkBags (both sold separately) to your bicycle. And, this tubular aluminum rack features tabs that clear most disc brake mounts so you can use your disc brake-equipped bike to run errands with your favorite little passenger or extra storage room.
Surly's burly line of tubular chromoly steel racks have been used on expeditions all over this planet for years.This Surly Rear Disc Rack is made of tubular chromoly steel and is specifically designed to fit frames with seatstay-mounted disc brakes like the Straggler (650B and 700c), Krampus, and Karate Monkey. - Tubular chromoly rack, stainless-steel hardware - Height-adjustable to accommodate 26-29" wheels - Hardware housed in reusable Surly Tool Bag
Boost the carrying capacity of your Topeak MTX BeamRack (sold separately) with their Dual-Side Frame. It enables you to attach panniers and other Topeak MTX bags to your BeamRack.
Axiom's Streamliner 29er DLX Rack centers loads close to the rear wheel for improved stability and handling on your 29er bike. It's made of reliable and lightweight aluminum, features struts to keep loads from getting close to the rear wheel, and offers ample heel clearance when you're carrying panniers.
Jandd Extreme Front Mount Rack is the only equipment to reach for when front panniers are a necessity. - All stress points are double-welded - Height (Overall): 16.75 inches - Height (Pannier Mounting): 12 inches - Width: 6 inches - Length: 13.5 inches - Weight: 1055 grams - Weight limit: 40 pounds
Sunlite's Welded Springer Rack is the perfect tool to allow commuters and tourers to carry extra gear. It's made of tough, light tubular aluminum, fits most bikes, and has a capacity of up to 50 pounds. And the spring-loaded bar helps hold your stuff securely.
Add a little cargo-hauling capacity to your road bike with Bontrager's BackRack Lightweight. It's made of aluminum and weighs just 465 grams, so it's perfect for turning your roadster into a fast commuter. It includes rustproof stainless-steel hardware, rear quick-release skewer and a mounting kit. It's also accepts Bontrager's Interchange trunk bags (sold separately).
Page 1 of 3 Next page